URBANTIME CAFE - REVIT 2024
Prepared November 4, 2026

CONTENTS
12 supplied source configurations: Eclipse Wire chair, Libra Wire four-leg and
sled chairs, Busy chair and armchair, Busy tall stool with and without arms,
Oreka three-leg and four-leg tables and four-leg tall table, LEG.03 round 590 mm
table and LEG.04 square 690 mm table. See Cafe_Product_List.csv for exact sources.

USE
Extract the ZIP and use Insert > Load Family in Revit 2024 or later. Select the
RFA files needed, then place with Architecture > Component. Furniture category.
These are fixed-size embedded manufacturer meshes with neutral CAD appearance,
without native size or finish parameters. Specify finishes separately. Mesh edges
may appear in line views. Models are centered in XY and grounded at Z=0.

COVERAGE
This package covers the available source configurations, not every catalog SKU.
Moontable has no matching source in the supplied archive. Other chair/stool frame
variants, heights, table tops and sizes without matching source geometry have not
been invented. Legacy Ribaltino, Ribaltone and Passepartout sources are not matched
to the current US Cafe range and are excluded. Miami is in the Ventiquattrore
release. XX source references are incomplete finish-specific order codes.
Confirm configuration and article numbers when specifying. Supplied model
measurements can differ from rounded catalog dimensions.

VALIDATION
All 12 RFAs were saved, reopened, loaded and placed in Revit 2024.3. Placed
geometry envelopes were checked against prepared source geometry within 2 mm.
Libra chairs were rotated from Y-up. Busy chairs were rotated to level their four
feet; their source coordinate system is tilted. Eclipse's centimeter mesh was
converted to millimeters. STEP mesh deflection setting: 1 mm. Five unmeshed STEP faces were tessellated from their trimmed analytic
surfaces and area checked. 
The full Revit collection view was visually reviewed.
