URBANTIME ZEROQUINDICI.015 - REVIT 2024
Prepared November 4, 2026

CONTENTS
46 distinct supplied manufacturer source configurations, each as a separate
Revit Furniture family. Includes Amalfi seating, straight and curved benches,
modular seating, cubes, chaise longue, bike racks, litter bins, Cabana, School
table/stool, rectangular tables and Octopus picnic assemblies.
See Zeroquindici_Product_List.csv for the exact source files and envelopes.

USE
Extract the ZIP, then in Revit 2024 or later choose Insert > Load Family.
Select only the RFA files needed and place with Architecture > Component.
The families contain fixed-size embedded manufacturer mesh geometry. They do
not have native Revit size or finish options. Neutral CAD appearance is used;
specify finishes separately. Mesh edges may appear in line views. Geometry is
centered in XY and grounded at Z=0; rotate instances as needed for the project.

CONFIGURATION AND COVERAGE
Benches, armrest arrangements, picnic seat counts, tall and standard Octopus
assemblies, and Cabana source configurations are separate files. Assemblies
can contain multiple pieces; avoid double-counting an assembly and its parts.
School table/stool models represent the supplied source height only; other
catalog heights are not selectable parameters. Source envelopes can differ
from rounded nominal catalog dimensions. XX source references are not complete
finish-specific order codes. Confirm the article/configuration when specifying.

Two exact School duplicates were removed. Two planter files in a VASI subfolder
were excluded because their references could not be matched to Zeroquindici.
This release covers available source configurations, not every catalog SKU.
Separate accessories, pillows, labels, other heights, and finish options without
matching source geometry have not been invented. These files do not certify
ADA compliance or replace installation/engineering documentation.

VALIDATION
Every family was saved and reopened in Revit 2024.3, loaded into an isolated
test project and placed as a Furniture instance. Placed envelopes were checked
against the prepared source geometry within 2 mm. Eleven Y-up source models
were rotated upright. STEP surfaces were meshed with a 1 mm deflection setting;
the geometry and orientation were visually reviewed in the Revit test view.
